无尘布的清洗加工要求,星梦无尘布
无尘布的清洗:
1.用18.2兆欧EDI纯水非离子型表面活性洗涤,对无尘布清洗。在清洗完毕后,要用清水进行的冲洗干净
2.不能使用漂白剂等化学试剂进行清洗,无尘布,这样会缩短无尘布的使用寿命。
3.应该选用中性洗涤剂用温水来清洗。
4.在空气中晾干或是用烘干机烘干,切勿熨烫或暴晒。
5.不能使用柔软剂,因为柔软剂会在**细纤维的表面上留下一层薄膜,这样会严重影响擦拭效果。
星梦防静电为:液晶显示屏生产,触摸屏生产,无尘布价格,光学玻璃生产,防静电无尘布,导光板生产扩散片生产,背光源生产,摄像头生产,模组生产等工厂提供无尘布。
什么是聚酯和纤维素混合的无尘布
至于高的无尘布价格相对较高,但特殊用途,在某一性能方面较其**的擦拭布。 比如防静电擦拭布 ,一般普通的防静电擦拭布采用聚酯纤维和导电纤维互锁双织而成,使布的两面都有有效的防静电功能。而的防静电无尘布就像丽净的黑防静电无尘布,就采用进口的原材料纤维丝,柔韧而且导电性能好,适用于对静电敏感的环境和对于干擦敏感的电子配件,特别适用于硬盘和磁头生产车
生产加工聚酯和纤维素混合的无尘布 普通纤维无尘布 东莞市星梦防静电制品有限公司,专注无尘布用品生产,可为客户提供各款无尘布样品试用!!!
无尘布
■ 产品用途:
电子、半导体、LCD、PCB等行业无尘室作业清扫用。
■ 产品特点:
具有高吸水率、高柔软性,使用时不会造成表面的磨损及残留污渍、水痕、适合干湿两用,有防静电功能。
■ 技术参数:
基本规格:4'×4'、6'×6'、9'×9'、12'×12'。可特别定制。
dust-free cloth
Use:
Used in electronic, semiconductor,LCD,PCB industries for cleaning and operation in dust-free room as well as for cleaning outside dust-free room.
Features:
The wiping cloth of new generation used for dust-free room is normally made of special fiber (polyester). It has high water absorption with high flexibility,卷轴无尘布, no wear is caused to and no besmirch or water marks remain on the surface when used. It is suitable for use in both wet and dry conditi and has the electrostatic prevention function.Its edges are tidy with little amount of dust as it is sealed around by laser, therefore, it can improve the fine rate of the products cleaned with it in course of use.
Parameters:
4'×4'、6'×6'、9'×9'、12'×12',Products with special sizes are available.